RW Parking Lifts

These utilitarian RW Parking Lifts are perfect for Parking, Storage or Service. Versatile, Practical and Extremely Reliable they are designed for car enthusiasts who appreciate quality at amazing value. Our qualified lift engineers install them to the highest standard and RW are proud to have them in our product range.

• 3,600kg Lifting Capacity.
• 240v Single motor.
• Simple easy to use controls.
• CE marked.
• Meets current BS1493 (2010) Standards.
• Dependable Freestanding Design
o Fully-enclosed lifting cables and safety lock system.
o Internal guide blocks in each column.
o Manually operated safety release system.
o Multi position automatic safety lock engagement system when lifting.

• Platform Design
o Can be set to accommodate both wide and narrow vehicles.
o Single hydraulic cylinder mounted underneath power platform.
o Extra length approach ramps for low ground clearance vehicles.
o Approach ramps can be removed for added drive-under clearance.
o Platforms include an integral rail arrangement for optional accessories.
 Solid Steel Jacking Tray enables the use of bottle jacks where appropriate.
 Optional 2500kg hydraulic jacking beams are available.
 Drip Trays supplied to protect vehicles beneath the platforms.
• Jockey wheel kit supplied should mobility be a requirement

Parking Lift Types

Click on ‘view more’ below to find out more about Parking Lift Options

View More

Installation Requirements

Prior to Installation the lift will require an individual 3-phase / Single phase connection. The electrical supply to the lift should also embody an earth leakage circuit breaker having appropriate characteristics in accordance with BS 7671.
• Permanent electrical connection to be completed by a qualified electrician.

The Floor Condition
• The concrete floor should be level and of the correct strength and depth to enable the lift to be erected safely.
• The lift must be installed on a level concrete floor, having minimum thickness of 12.5cm* with a minimum grade of M25 as used in general construction situations and must be relatively smooth and levelled in all directions. *The depth of concrete can be ascertained by a simple test drilling of 12mm diameter that confirms our minimum depth requirement.
• We do not under any circumstances install lifts on asphalt.

It is imperative that the floor on which the lift is to be installed meets the above requirements.
• At the very least it will reduce the performance of the lift or incur property damage or personal injury
• Failure by the purchaser to confirm these recommended requirements may result in the lift not being able to be erected and will incur a charge of 60% of the quotation..

• Whereas electrical testing can be under taken by RW Garage Equipment to confirm the operation of the equipment it is legally required that the final electrical installation must be undertaken by a qualified electrical engineer.
• On the assumption that this is a 240v single phase installation it must be noted that the electrical breakers should be a 32 amp ‘C’ or ‘D’ rated breaker due to the initial loading of the motor on start up as opposed to standard ‘A’ and ‘B’ rated breakers which operate up to 16 and 32 amps respectively.

View More

Legal Requirements

The vehicle lift should be installed taking into account its position and the accessibility of all parts so that periodic examinations, testing, maintenance and repairs can be readily and safely carried out.
The suitability of the floor or surface; e.g. concrete etc., should be assessed in order to confirm its capability of supporting localized loads that are imposed by maximum loads when operating the vehicle lift.
Regulation 6 of LOLER [2] requires that the lifting equipment is positioned or installed in such a way as to reduce, to as low as is reasonably practicable, the risk of the equipment or load striking a person. Therefore, in addition to the positioning of the lift, the lifting operation being carried out should be assessed before the equipment is installed.
Fixed vehicle lifts should be positioned so that throughout their range of movement any moving part is either at least 600mm away from, or not more than 12mm away from the nearest fixed structure. Fixed vehicle lifts should not be less than 600mm away from any other adjacent fixed structure throughout the movement of the lift.
Where a vehicle lift is being installed adjacent to any other equipment that moves vertically, the clearance between the equipment and the lift should be at least 600mm. Consideration should be given prior to installation to the position of adjacent doorways and other possible hazards.

View More

Commercial and Private Finance

RW Garage Equipment offer financial services to all our customers both in the commercial sector and private individuals. Working in partnership with Kennet Equipment Leasing we excel in providing finance solutions to suit our customers’ requirements and cash flow.

Once you have decided on what equipment you need, we will work with you so that you can have the best equipment you need – not just the cheapest available.

With fixed payments throughout the term of the transaction, this allows you to manage your business budget effectively. In some cases with little or no deposit to find, you won’t need to use valuable cash reserves or take out a loan.

Watch this space as RW Garage Equipment develop this most valuable customer resource.

View More

RW Garage Equipment Ltd,

Unit D, Sheriff House Trading Estate,
Nantwich Road,
CW10 0LH